 |
 |
|
 |
||
| |
||
| New Products in 2005 | |
| EKATO | If your plant is subject to CAA regulations regarding
agitators in hazardous organic chemical service, an EKATO
double mechanical seal with a pressure compensating system will reduce your
monitoring and maintenance requirements. Because the pressure compensator
always maintains a higher pressure than the vessel pressure, only a periodic
visual inspection of the seal system is required. No leak monitoring is required. |
| KSB | The HGM-RO high-pressure pump series from KSB
is now available in five additional sizes. KSB can now supply pump sets with flow rates of up to 5000 gpm
and discharge heads of 3000 ft for the growing seawater desalination market. Compared with conventional axially-split
machines, the ring-section pump design offers markedly improved efficiencies, reducing energy costs.
|
| NEDERMAN | The newly updated hood for the Nederman Original
Arm has five improved features: crush-resistant, composite material; built-in protection grid to keep foreign debris out of
system; a flat back edge for use against a flat surface; 3-position damper (open, reduced flow and closed);
and a flange type hood to improve capture capacity. Additional improvements have been made to the optional on-hood light
and fan switches, along with the hood light. And, most importantly, the new hood works with your old arm!
|
| SELAS FLUID PROCESSING | Selas Fluid Processing
announces that the Thermatrix flameless thermal oxidation technology is now
an optional heat source for T-Thermal’s submerged combustion vaporizer (SCV)
equipment. These vaporizers are used predominately to regasify liquefied
natural gas (LNG) at both import terminals and peak shaving gas plants.
In this new application, flameless thermal oxidizer technology will be offered
as an alternative to conventional SCV burners to limit NOx and CO emissions
to less than 10 ppm each, without the use of a catalyst or reducing chemicals
such as ammonia or urea. Read more |
| PS4I | KEEL is proud to announce a new partnership
with Pumps and Systems for Industry in Scranton. PS4I will call on KEEL's clients
in Wilkes-Barre, Scranton, Hazelton and the Pocono. KEEL will offer PS4I's manufacturers to our clients in the Greater Philadelphia area. |
| New Products in 2004 | |
| DICKOW | New API 685 sealless, metal mag-drive pumps are now available from Dickow Pumps. The PRM pumps are single stage, radial-split volute casing pumps with closed impellers and back pull-out design. The pumps are designed for a minimum service life of 20 years and an uninterrupted operation of at least 3 years. |
| EKATO | To further support the technology of mixing,
Ekato USA is building a Process Development Reactor, which will be available for customer trials and testing on a rental basis.
In addition, Ekato will provide training, recommendations, analysis of results, and scale-up expertise. The ELA 5
can be fit with most Ekato impellers; for example gassing applications (hydrogentaions, ethoxylations...).
This is a fabulous opportunity for our clients who do not have a capital lab equipment budget, and/or lack the facilities to do this type of process testing. |
| FLOTRONIC | Flotronic relaunches its product line. The four pump models have been consolidated into the F series, making it easier to offer the most cost-effective solution for your AOD application. Never fear, if you've fallen in love with a Flotronics pump, it's still available! Call us today! | Kriebel Engineered Equipment is pleased to announce that it is now
offerring the full line of Flotronic Pumps "One-Nut" air-operated double diapraghm pumps.
Designed specifically to meet the demands of the food and chemical process industries, these pumps are the only AODs to offer diaphragm rupture
protection, along with simple, in-place diaphragm replacement. To find out how the One-Nut pump can benefit you, please call today. |
| GIW | GIW announces its new conversion pump program. GIW has designed
wet ends of its popular LSA, LSR and LCC-R models to utilize your existing slurry pumps' drive ends. If you have a slurry pump at your facility due
for a major overhaul, a GIW conversion pump can improve performance, increase efficiency and extend wear life. For more information on how converting your old pumps
to GIW will save you time and money, call us or fill out our contact form |
| MAGNATEX | Magnatex now offers SiC-D bearings
and sleeves that will withstand dry-run start-ups without failure for the MP, MPT, MPH and MMP. These bearings and sleeves have a special,
proprietary surface treatment that allows the pump to be run for extended periods with no damage. Because the
surface is very smooth with a very low coefficient of friction, minimal heat is generated and the bearings and
sleeves do not heat up. This prevents cracking and failure while the pump is running dry and when process fluid
is finally introduced into the system and the pump starts running normally. |
| NEDERMAN | Nederman has launched a new range of
FilterCart units
based on the original and highly successful FilterCart concept. The new FilterCart Standard model offers an ideal extration
solution for light welding applications in maintenance workshops, with a simple particle filter. The FilterCart Original
model offers complete mobile fume extraction and filtration with a 40% larger particle filter, HEPA filtration option, and
standard halogen spotlight included with the extraction hood. The FilterCart Carbon model utilizes activated carbon for handling
solvent-based products. All models are equipped with a 7 ft self-supporting extraction arm,and 110V single-phase fan. |
| ROTOJET | Roto-Jet has not one, not two, but THREE new pumps models! The RD11 is a close-coupled design -- no pump bearings, no coupling, no gears, no belts! It's all the benefits of the R11 model with a simplified drive end. The 2100 and 2200 models incorporate design and hydraulic efficiencies and are footprint compatible with the older RG model. Plus, Roto-Jet has a new, innovative, variable-speed drive, the VSR, which provides automated control without using a variable frequency drive. The variable speed performance can provide significant energy savings. |
| Roto-Jet VSR 2100 wins Technical Innovation of the Year Award from the British Pump Manufacturers Association. | |
| RUHRPUMPEN | Ruhrpumpen now offers double-suction, horizontal split case fire pumps. These
UL-listed, FM approved pumps are available in flows upto 2500 gpm and pressures upto 197 psig. The compact desgin offers longer packing and bearing life for reduced
maintenance costs, and a smaller overall footprint. |
|
|
|
140 Ivy Lane • King of Prussia, PA 19406
(610) 337-8995 • Fax: (610) 337-8996 • sales@kriebel-ltd.com
| |